Perforation Stripe Range
Perfect for that special project that requires extra detail with both vision and tactile impact. It is designed for wall and ceiling panelling used in interior design and architecture projects that require large impact areas with a difference! From cinema rooms to smaller bespoke applications with a unique finish… Stripes can be produced on both Roll materials and Leather hides!
The Stripe Range
Pinstripe
Pinstripe is the finest detailed perforation pattern of the range, ask for it by name or request.
Stripes 1 to 4
We offer 4 standard wider stripe options in the range.
Stripes available on roll materials and leather hide processing.
Request a sample today!
Pinstripe is the finest detailed perforation pattern of the range, ask for it by name or request.
Stripes 1 to 4
We offer 4 standard wider stripe options in the range.
Stripes available on roll materials and leather hide processing.
Request a sample today!
Take a closer look at each pattern type and even download the pattern image if you wish. Scroll to bottom for our Pattern Card, which is also downloadable.
Stripe Dimensions listed are taken from centre to centre of Perforation holes.
Download our Pattern Card
Click the thumbnail images to download our Pattern Card to keep as a handy reminder.
November 2020 version.
Click the thumbnail images to download our Pattern Card to keep as a handy reminder.
November 2020 version.
Stripes can be produced in a continuous repeated pattern on roll materials, leather and pre-cut items.
We can also produce bespoke patterns upon request.
Roll materials: Processed by running meter, Max width 160cm.
Full Roll to roll continuous processing
Leather:
Processed by half hides or pre-cut panels up to max 160cm wide
We can also produce bespoke patterns upon request.
Roll materials: Processed by running meter, Max width 160cm.
Full Roll to roll continuous processing
Leather:
Processed by half hides or pre-cut panels up to max 160cm wide
Pre-cut items:
All Pre-cut items must allow for 1 extra complete stripe at the top and bottom edges of the cut panel. An allowance of 25mm on the side edges must be added for correct alignment of finished products. Centre of top and bottom to be marked on each item.
Bespoke Stripe patterns available on request.
All Pre-cut items must allow for 1 extra complete stripe at the top and bottom edges of the cut panel. An allowance of 25mm on the side edges must be added for correct alignment of finished products. Centre of top and bottom to be marked on each item.
Bespoke Stripe patterns available on request.
Disclaimer: Perforation patterns are intended for design aesthetics only. It is the end manufacturers responsibility to make sure that any items made using perforation patterns do not infringe the copyright or patents of other manufacturers.
Tel: 01202 744366 or Email: enquiries@ukperforation.co.uk